General

• NECA 1000, NEIS Specification System

  The complete set of National Electrical Installation Standards in paper book format.

   

  IMPORTANT INFORMATION FOR PURCHASERS - Only the complete NEIS Specification System which consists of the above publications is available for purchase. Every time a new standard is published, the number of publications in the Specification System will be increased by one, and the price adjusted accordingly. We cannot accept special orders for only certain publications; however, you can purchase the NEIS Big Red Binder separately to house your growing collection of installation standards.

  For quantity discounts, call the NECA Order Desk at 301-215-4504.

• NECA 1001, NEIS Red Binders

  These custom binders feature striking full-color graphics on the cover and spine, opens flat for easy use.

  For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

• NECA 100-2006 Electrical Symbols Set

  This NEIS set contains the standard that describes the graphic symbols used to represent electrical wiring and equipment on construction drawings and summarizes the recommended drawing practices, as well as a CD in Auto-Cad format with the NECA 100 symbols representing electrical wiring and equipment.

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 100-2006 Symbols for Electrical Construction Drawings (ANSI)

  Describes graphic symbols used to represent electrical wiring and equipment on construction drawings. This standard also summarizes recommended drawing practices for electrical construction drawings.

  For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

• NECA 1-2010 Standard Practice of Good Workmanship in Electrical Construction (ANSI)

  Describes industry best practices for good workmanship in electrical construction. NECA 1 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

• NECA 1-2010 Standard Practice of Good Workmanship in Electrical Construction (ANSI)

  Describes industry best practices for good workmanship in electrical construction. NECA 1 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

• NECA 130-2010, Standard for Installing and Maintaining Wiring Devices

  Describes the Installing and Maintaining of low-voltage wiring devices permanently installed on building premises wiring systems for residential, commercial, and industrial applications in non-hazardous (unclassified) locations, such as for convenience receptacles, lighting switches, disconnect switches, and fixed, stationary or portable electric signs.
  
  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 130-2010, Standard for Installing and Maintaining Wiring Devices

  Describes the Installing and Maintaining of low-voltage wiring devices permanently installed on building premises wiring systems for residential, commercial, and industrial applications in non-hazardous (unclassified) locations, such as for convenience receptacles, lighting switches, disconnect switches, and fixed, stationary or portable electric signs.
  
  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 200-2010, Recommended Practice for Installing and Maintaining Temporary Electric Power at Construction Sites (ANSI)

  Describes installation procedures for temporary power at construction sites. It covers the planning, installation, expansion, maintenance, cutover, and removal of temporary power systems operating at 600 volts or less. NECA 200 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

   

• NECA 200-2010, Recommended Practice for Installing and Maintaining Temporary Electric Power at Construction Sites (ANSI)

  Describes installation procedures for temporary power at construction sites. It covers the planning, installation, expansion, maintenance, cutover, and removal of temporary power systems operating at 600 volts or less. NECA 200 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

   

• NECA 331-2009, Standard for Building and Service Entrance Grounding and Bonding (ANSI)

  Describes installation procedures for building and service entrance grounding as well as building interior bonding and grounding.

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 331-2009, Standard for Building and Service Entrance Grounding and Bonding (ANSI)

  Describes installation procedures for building and service entrance grounding as well as building interior bonding and grounding.

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 420-2007 Standard for Fuse Applications (ANSI)

  This standard describes application and installation practices and procedures for low-voltage, medium-voltage, and high-voltage fuses. This publication applies to all classifications of fuses used for overcurrent protection of distribution, utilization, and control equipment used for power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous indoor and outdoor locations.

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA 700-2010 Standard for Installing Overcurrent Protection to Achieve Selective Coordination

  Describes the application procedures for selecting and adjusting low-voltage overcurrent protective devices to achieve selective coordination. NECA 700 is approved as an American National Standard (ANS).
  
  For quantities over 10, please contact the NECA Order Desk at orderdesk@necanet.org, or by phone at 301-215-4504 for bulk pricing.

• NECA 700-2010 Standard for Installing Overcurrent Protection to Achieve Selective Coordination

  Describes the application procedures for selecting and adjusting low-voltage overcurrent protective devices to achieve selective coordination. NECA 700 is approved as an American National Standard (ANS).
  
  For quantities over 10, please contact the NECA Order Desk at orderdesk@necanet.org, or by phone at 301-215-4504 for bulk pricing.

• NECA 90 Recommended Practice for Commissioning Building Electrical Systems (ANSI)

  Describes procedures for commissioning newly installed or retrofitted building electrical systems. It defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances that conform to design, specifications, and industry-accepted codes and standards. NECA 90 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

   

• NECA 90 Recommended Practice for Commissioning Building Electrical Systems (ANSI)

  Describes procedures for commissioning newly installed or retrofitted building electrical systems. It defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances that conform to design, specifications, and industry-accepted codes and standards. NECA 90 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

   

• NECA/AA 104-2012, Standard for Installing Aluminum Building Wire and Cable (ANSI)

  This standard describes installation procedures and design considerations for aluminum building wire and cable in residential, commercial, institutional and industrial applications not exceeding 2000 volts. 

  Developed jointly with the Aluminum Association, NECA/AA 104-2012 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the order desk at 301-215-4504 for bulk pricing.

• NECA/AA 104-2012, Standard for Installing Aluminum Building Wire and Cable (ANSI)

  This standard describes installation procedures and design considerations for aluminum building wire and cable in residential, commercial, institutional and industrial applications not exceeding 2000 volts. 

  Developed jointly with the Aluminum Association, NECA/AA 104-2012 is approved as an American National Standard (ANS).

  For quantities over 10, please contact the order desk at 301-215-4504 for bulk pricing.

• NECA/FOA 301-2009, Standard for Installing and Testing Fiber Optics (ANSI)

  Describes installation and testing practices for optical fiber systems used for communications purposes. Developed jointly with the Fiber Optic Association, the certification body for fiber optic technicians and installers.
  
  NECA/FOA 301 is approved as an American National Standard (ANS).
  
  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NECA/FOA 301-2009, Standard for Installing and Testing Fiber Optics (ANSI)

  Describes installation and testing practices for optical fiber systems used for communications purposes. Developed jointly with the Fiber Optic Association, the certification body for fiber optic technicians and installers.
  
  NECA/FOA 301 is approved as an American National Standard (ANS).
  
  For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

• NEIS Yearbook Volume 8

  This CD contains all NEIS published through September 2012. For quantities over 10, please contact the NECA Store Order Desk at 301-215-4504 or orderdesk@necanet.org for bulk pricing information.

• NEIS Yearbook Volume 8

  This CD contains all NEIS published through September 2012. For quantities over 10, please contact the NECA Store Order Desk at 301-215-4504 or orderdesk@necanet.org for bulk pricing information.

Featured Publications