• NECA 100-2013 NEIS Symbols for Electrical Construction Drawings (ANSI)

    This publication describes graphic symbols used to represent electrical wiring and equipment on construction drawings,. In this publication, the term “electrical” is used to include electrical, electronic, and communications systems covered by the National Electrical Code (NFPA 70). This publication also summarizes recommended drawing practices for electrical construction drawings.

    For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

    For those purchasing the PDF version of NECA 100:
    A link containing a .zip file with the NECA 100 AutoCad Symbol files can be downloaded from the Table of Contents. NOTE: It's a zip file, so it will immediately initiate a download.

  • NECA 101-2013 Standard for Installing Steel Conduits (Rigid, IMC, EMT) (ANSI)

    This standard describes installation proceedrues for steel rigid metal conduit (RMC), steel intermediate metal conduit (IMC), and steel electrical metallic tubing (EMT). Conduit with supplementary PVC coating is also included. NECA 101 is approved as an American National Standard (ANS)

    This publication is intended to enhance electrical safety by:

      1. Aiding installers in meeting the "neat and workmanlike" requirements
      2. Reducing future repair needs
      3. Providing future expansion to avoid electrical overload
      4. Creating an installation which will protect wire conductors from mechanical abuse
      5. Providing electrical continuity of the raceway system

    For quantities over 10, please contact the NECA Order Desk at 301.215.4504 or orderdesk@necanet.org

    Learn more about NECA's NEIS at NECA-NEIS.org

  • NECA 102-2004, Standard for Installing Aluminum Rigid Metal Conduit (ANSI)

    Describes installation procedures for aluminum rigid metal conduit, including aluminum RMC with a supplementary PVC coating. NECA 102 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

  • NECA/AA 104-2012, Standard for Installing Aluminum Building Wire and Cable (ANSI)

    This standard describes installation procedures and design considerations for aluminum building wire and cable in residential, commercial, institutional and industrial applications not exceeding 2000 volts. 

    Developed jointly with the Aluminum Association, NECA/AA 104-2012 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the order desk at 301-215-4504 for bulk pricing.

  • NECA/NEMA 105-2007, Standard for Installing Metal Cable Tray Systems (ANSI)

    NECA/NEMA 105-2007, Standard for Installing Metal Cable Tray Systems (ANSI) describes installation practices and procedures for metal cable tray systems. Details about maintenance, system modification, grounding and bonding, and inspection and addition of cables are complemented by illustrations throughout. A full list of reference standards is also included.

     

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 1-2010 Standard Practice of Good Workmanship in Electrical Construction (ANSI)

    Describes industry best practices for good workmanship in electrical construction. NECA 1 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

  • NECA 111-2003, Standard for Installing Nonmetallic Raceways (RNC, ENT, LFNC) (ANSI)

    Describes installation procedures for nonmetallic raceways of circular cross-section used for electrical power wire and cable, communications wiring, or fiber optic cables. NECA 111 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the Order Desk at 301-215-4504 for bulk pricing.

     

  • NECA 120-2012, Standard for Installing Armored Cable (Type AC) and Metal-Clad Cable (Type MC)

    Describes installation procedures for Type AC and Type MC cables, which are used for electrical wiring for residential, commercial, and industrial occupancies. It also includes information on fittings and other accessories necessary for a quality installation and maintenance of these cable systems. NECA 120 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 121-2007, Standard for Installing Nonmetallic-Sheathed Cable (Type NM) and Underground Feeder and Branch-Circuit Cable (Type UF) (ANSI)

    This standard describes installation procedures for nonmetallic-sheathed cable (Type NM) and underground feeder and branch-circuit cable (Type UF).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 169 Standard for Installing and Maintaining Arc-Fault Circuit Interrupters

    This standard describes the installation and maintenance procedures for Arc-Fault Circuit Interrupters (AFCIs) and Ground-Fault Circuit Interrupters (GFCIs).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 200-2010, Recommended Practice for Installing and Maintaining Temporary Electric Power at Construction Sites (ANSI)

    Describes installation procedures for temporary power at construction sites. It covers the planning, installation, expansion, maintenance, cutover, and removal of temporary power systems operating at 600 volts or less. NECA 200 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

     

  • NECA 202-2013 Standard for Installing and Maintaining Industrial Heat Tracing Systems (ANSI)

    This standard describes procedures for the installation, testing, and documentation of electrical freeze protection and process heat tracing systems. Heat tracing cable types covered by this publication include: self-regulating, constant wattage, and zone heating cables and mineral insulated (MI) heating cables.NECA 202 is approved as an American National Standard (ANSI).

  • NECA 230-2010, Standard for Selecting, Installing, and Maintaining Electric Motors and Motor Controllers (ANSI)

    Describes procedures for selecting, installing, and maintaining stationary electric motors and motor controllers rated 600 volts or less. NECA 230 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

     

  • NECA/FOA 301-2009, Standard for Installing and Testing Fiber Optics (ANSI)

    Describes installation and testing practices for optical fiber systems used for communications purposes. Developed jointly with the Fiber Optic Association, the certification body for fiber optic technicians and installers.

    NECA/FOA 301 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 303-2005, Standard for Installing Closed-Circuit Television Systems (CCTV) (ANSI)

    Describes installation procedures for closed-circuit television (CCTV) systems. NECA 303 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 305-2010, Standard for Fire Alarm System Job Practices (ANSI)

    Describes fire alarm system job practices for installing, testing, and maintaining fire alarm systems. These job practices represent a minimum level of quality for fire alarm system installations. NECA 305 was revised in 2010 and is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 331-2009, Standard for Building and Service Entrance Grounding and Bonding (ANSI)

    Describes installation procedures for building and service entrance grounding as well as building interior bonding and grounding.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 400-2007, Standard for Installing and Maintaining Switchboards (ANSI)

    This standard describes installation procedures for deadfront distribution switchboards rated 600 volts or less. This standard also covers periodic routine maintenance procedures for switchboards and special procedures to be used after adverse circumstances, such as a short circuit, ground-fault, or immersion in water. NECA 400 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 402-2007, Standard for Installing and Maintaining Motor Control Centers (ANSI)

    Describes installation and maintenance practices for motor control centers rated 600 volts or less. It also covers periodic routine maintenance procedures for motor control centers and special procedures to be used after adverse circumstances, such as a short-circuit, ground-fault, or immersion in water. NECA 402 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/EGSA 404-2014 Standard for Installing Generator Sets (ANSI)

    This Standard describes installation procedures for generators and related accessories and systems that are permanently installed for on-site standby or emergency power generation that are

     

    typically fueled by natural gas or diesel.  Such generators may be defined as “emergency systems” or “legally-required standby systems” intended to supply power for emergency or life-safety applications in accordance with NFPA 70, National Electrical Code.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 406-2003, Standard for Installing Residential Generator Sets (ANSI)

    Describes installation procedures for (a) Generator sets permanently installed at one-family dwellings to provide backup power, typically rated 120/240 volts, single-phase, three-wire; and (b) Generator sets fueled by gasoline, natural gas, or liquified petroleum (LP) gas. NECA 406 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 407-2009, Recommended Practice for Installing and Maintaining Panelboards (ANSI)

    Describes the installation procedures for panelboards rated 600 volts AC or less, with main disconnects or lugs rated 1600 amperes or less and with feeder or branch circuit overcurrent devices rated 1200 amperes or less. It also covers periodic routine maintenance and troubleshooting procedures to be used after adverse operating conditions such as a short-circuit, ground-fault, or immersion in water. NECA 407 is approved as an American National Standard (ANS).

    For bulk pricing, contact NECA's order desk, 301-215-4504 or orderdesk@necanet.org.

  • NECA 408-2009, Standard for Installing and Maintaining Busways (ANSI)

    Describes installation procedures for feeder and plug-in busways and associated accessories rated 600 volts AC or less and 100 amperes or more. It also covers periodic routine maintenance procedures for busways and special procedures used after adverse operating conditions, such as a short-circuit, ground-fault, or immersion in water. NECA 408 is approved as an American National Standard (ANS).

  • NECA 409 - 2009, Standard for Installing and Maintaining Dry-Type Transformers (ANSI)

    Describes installation and maintenance practices for dry-type, two-winding transformers used for supplying power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous locations, both indoors and outdoors. NECA 409 is approved as an American National Standard (ANS).

  • NECA 410-2013 Standard for Installing and Maintaining Liquid-Filled Transformers (ANSI)

     

    This standard describes installation procedures for pad-mounted, sealed, self-cooled or fan-cooled, compartmental, single- and three-phase liquid filled distribution and power transformers with primary windings rated from 2400 volts to 35 kV AC, nominal, and rated from 75 kVA through 5000 kVA, and associated accessories, designed for outdoor installation at grade level with underground entrance of primary and secondary conductors, and used for supplying power, heating and lighting loads for commercial, institutional, and industrial use in nonhazardous locations.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 411-2006 Standard for Installing and Maintaining Uninterruptible Power Supplies (UPS) (ANSI)

    Describes installation and maintenance procedures for permanently installed, static, three-phase Uniterruptible Power Supplies (UPS) rated 30 kVA or more and rated 600 volts or less and related battery systems installed indoors and outdoors for commercial, institutional, and industrial applications. NECA 411 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 413-2012 Standard for Installing and Maintaining Electric Vehicle Supply Equipment (EVSE)

    This standard describes essential procedures for installing and maintaining AC Level 1, AC Level 2 and both AC/DC fast charging Electric Vehicle Supply Equipment (EVSE). The standard includes quality and performance aspects of these installations including performing site assessments. Information related to design and coordinating individual unit installation and fleet/multiple unit installations is included in addition to installer and inspection guidelines and checklists.

  • NECA 420-2014 Standard for Fuse Applications (ANSI)

    This standard describes application and installation practices and procedures for low-voltage fuses. This publication applies to all classifications of fuses used for overcurrent protection of distribution, utilization, and control equipment used for power, heating, and lighting loads for commercial, institutional, and industrial use in nonhazardous indoor and outdoor locations.

    It also covers periodic routine maintenance and troubleshooting procedures for fuses, and special procedures used after adverse operating conditions, such as overcurrents, ground-faults, or exposure to water or other liquids.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 430-2006, Standard for Installing Medium-Voltage Metal-Clad Switchgear (ANSI)

    Describes installation of medium-voltage metal-clad switchgear. NECA 430 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/IESNA 500-2006, Standard for Installing Indoor Lighting Systems (ANSI)

    Describes installation procedures for indoor-commercial lighting systems, including fluorescent and HID luminaires. Developed jointly with the Illuminating Engineering Society of North American. NECA/IESNA 500 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/IESNA 501-2006 Standard for Installing Exterior Lighting Systems (ANSI)

    Describes installation procedures for installing exterior lighting systems. NECA/IESNA 501 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/IESNA 502-2006 Standard for Installing Industrial Lighting Sytems (ANSI)

    This standard describes installation procedures for installing industrial lighting systems. NECA/IESNA 502 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 503-2005, Standard for Installing Fiber Optic Lighting Systems

    Describes installation procedures for installing glass fiber optics lighting systems.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA 505 Standard for Installing and Maintaining High Mast, Roadway and Area Lighting

    This standard describes the installation and maintenance procedures for high mast, roadway, area, and sport lighting systems installed outdoors for commercial, institutional, and industrial applications.

    This Standard applies to high intensity discharge lighting luminaires rated 600 Volts and less and mounted on poles. This Standard does not apply to specialized applications or installations with special environmental or regulatory conditions.

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/BICSI 568-2006, Standard for Installing Building Telecommunications Cabling (ANSI)

    Describes installation procedures for telecommunications, including balanced twisted-pair copper cabling and optical fiber cabling that transport telecommunications signals (e.g., voice, local area network). NECA/BICSI 568 is jointly developed with BICSI and approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/MACSCB 600-2003, Recommended Practice for Installing and Maintaining Medium-Voltage Cable (ANSI)

    Describes installation procedures for shielded and non-shielded solid dielectric medium-voltage cables rated from 600 volts to 69,000 volts AC and installed in conduits, ducts, or direct buried. This publication applies to single and multi-conductor cables used for distributing power for commercial, institutional, and industrial load in nonhazardous locations both indoors and outdoors. NECA 600 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/NEMA 605-2005, Recommended Practice for Installing Underground Nonmetallic Utility Duct (ANSI)

    Describes the installation, shipping, and handling of underground single bore nonmetallic duct for power, lighting, signaling, and communications applications. Developed jointly with the National Electrical Manufacturers Association, NECA/NEMA 605 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

  • NECA/BICSI 607-2011, Standard for Telecommunications Bonding and Grounding Planning and Installation Methods for Commercial Buildings

    This American National Standard specifies aspects of planning and installation of telecommunications bonding and grounding systems within a commercial building. This standard is intended to enhance the planning, specification and layout of an effective telecommunications bonding and grounding system. Additionally, this standard specifies installation requirements for components of the telecommunications bonding and grounding system.

    For quantities over 10, please contact the NECA Order Desk at orderdesk@necanet.org or by calling 301-215-4504 for bulk pricing.

  • NECA 700-2010 Standard for Installing Overcurrent Protection to Achieve Selective Coordination

    Describes the application procedures for selecting and adjusting low-voltage overcurrent protective devices to achieve selective coordination. NECA 700 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Order Desk at orderdesk@necanet.org, or by phone at 301-215-4504 for bulk pricing.

  • NECA 701-2013 Standard for Energy Management, Demand Response and Energy Solutions

    This standard describes methods and procedures used for performing energy conservation surveys, controlling and maintaining energy consumption, implementing the smart grid and demand response, and developing, implementing and evaluation energy conservation measures for residential, commercial, and industrial applications.

  • NECA 90 Recommended Practice for Commissioning Building Electrical Systems (ANSI)

    Describes procedures for commissioning newly installed or retrofitted building electrical systems. It defines the process of commissioning building electrical systems and provides sample guidelines for attaining optimum system performances that conform to design, specifications, and industry-accepted codes and standards. NECA 90 is approved as an American National Standard (ANS).

    For quantities over 10, please contact the NECA Store at 301-215-4504 for bulk pricing.

     

Featured Publications

NFPA 70E Personal Protective Equipment (PPE) Selector

 

Index#: 5024-12 

#1 Selling NECA Publication: This manual was developed to assist the industry in understanding and applying the personal protective requirements of NFPA 70E, "Standard for Electrical Safety in the Workplace".  

Order Today! 

» Learn More